Jump to content

Nicolinux

Expert
  • Posts

    3,003
  • Joined

  • Last visited

  • Days Won

    12

Everything posted by Nicolinux

  1. Hi, das geht mir genau so. Ich habe es auch nur einmal gesehen, auch wenn ich mich nicht anmelde. Ich denke die Logik ist so: 1. Für die Forumssoftware unbekannter Besucher wird erkannt - Popup anzeigen und im Cookie speichern dass er es bereits gesehen hat. 2. Beim nächsten Besuch wird geprüft ob der Besucher das Popup bereits gesehen hat - wenn nicht, siehe 1. Da die meisten ihre Cookies nicht nach jeder Session löschen, funktioniert die Logik.
  2. Hm seltsam. Ich weiss nicht warum solche Werte erzeugt werden. Vielleicht ist dein Temperatursensor entweder nicht richtig eingebaut (vielleicht hat nicht genügend Kontaktfläche mit der Nozzle) und liesst die Werte sehr schräg aus. Ansonsten vom Ablauf her hast du es schon richtig gemacht. Zunächst alles auf 0 setzen, speichern und dann autotune laufen lassen.
  3. I was using the spring replacement with this coupler that failed after 10 hours.
  4. I hope I did - would be pretty embarrassing otherwise
  5. Man lucky you. I just threw away a hand full of failed couplers - all with dents inside... @gr5: I'll be there for sure. Can't wait Maybe @ultiarjan ist right, maybe the pressure was too high. But still - I don't think it is normal for a coupler to die that fast, even under greater pressure. @neotko: Sadly the dent is pretty deep so I'd have to cut a lot off the coupler. I have the I2K chip but somehow I never had luck with it. Regardless of what I did, there was always under extrusion with it.
  6. Hey Sander, I am using Google Chrome on a Mac and I don't delete cookies that often but my session here on the forum expires after roughly 1 hour... This doesn't happen with other sites/platforms (so soon).
  7. Hi, I have a weird issue with my UM2. I have printed with different filaments lately and killed a few PTFE couplers. That's fine because I expected it. But now I have a brand new glass reinforced coupler that looks like this after only 10 hours of printing with PLA: I used this spring replacement. Could this hardcore deformation happen so soon if there is too much pressure on the coupler?
  8. I think there is a ambiguity about the notifications settings. For example I'd like to disable notifications about new 3d prints that show up on the bell icon on the top right: I thought I'd be able to do it in the "settings" area that is on the top right of the notifications window: But there I am only able to select "No e-mail". That's not right. I'd expect the notification settings to be also related to the bell icon and not only to email notifications. There is no clear distinction between them.
  9. @ralfbuschbiz: Ich schließe hiermit diesen Thread da sich dank @mieserdrucker keine vernünftige Unterhaltung mehr entwicklen kann. @mieserdrucker: Bitte beachte meine erneute (und letzte) Warnung und hör auf persönlich beleidigend zu sein. Wenn du ein Problem mit dem Ultimaker Produkt hast wobei dir hier im Forum nicht ausreichend geholfen wird, dann wende dich bitte an deinen Händler oder wie @Dim3nsioneer vorgeschlagen hat an Sander. Alternativ kannst du dich auch direkt an mich wenden und ich werde dir so gut wie möglich helfen. Sollte ein Austausch oder einer Rückgabe möglich sein, dann wird es nach Klärung der Formalitäten seinen Lauf nehmen.
  10. Halo @mieserdrucker, solche beleidigenden Posts haben hier im Forum nichts zu suchen. Solltest du an einer ernsthaften Unterhaltung interessiert sein, sieh bitte von solchen Posts ab.
  11. Ich habe die Raspicam angeschlossen und diese funktioniert direkt. Ich glaube ich musste zuvor in Konfigurations-tool (raspi-config) die Kamera aktivieren.
  12. @eldrick: I've had this too. I think it has something to do with the "shells" setting. I am printing parts with three shells (1.2mm) and when the infill meets the inner shell, the printer produces just a drop of filament instead of finishing the infill line and going to the next one.
  13. Hi, ich glaube da gibt es keine Pläne. Ich meine mich zu erinnern dass es sogar zwei externe Anbieter gibt die ein Dualextruder Update anbieten. Habe aber keinen Link parat - sorry.
  14. Welche Drucker setzt du noch ein? Ich habe bis jetzt einen Delta gebaut und bin gerade dabei einen 1m hohen Delta zu bauen. Habe allerdings bis jetzt keinen Drucker persönlich gesehen/benutzt der den UM qualitätsmässig überholt hat. Die Platform ist bauartbedingt schon etwas anfällig für Vibrationen. Ich hatte allerdings dieses Problem dass Layer nicht genau über einander liegen in Verbindung mit under extrusion gesehen und das nicht auf das Heizbett bezogen. Such mal nach Ultimaker und bed stabilisator (oder so). Ich meine mich zu erinnern dass jemand da was gebastelt hatte.
  15. Öhm... Keine Ahnung Darauf basierend klingt schon sehr ähnlich. Vielleicht hast du Recht.
  16. I never tried to adjust the bed leveling while the skirt is printed. I want to press play, wait a second to see if the filament won't catch onto the nozzle and then leave. Autocalibration does not take nozzle size into account, but you do specify this in Cura when you slice your stuff. Since there are several settings depending on nozzle size (shell thickness for example), I don't think autocalibration should mess with that. And about the nozzle size - mine from Carl too but not all are the same style/size.
  17. Well this shouldn't happen. Usually after a finished print, the filament is retracted a tiny bit. Then for the next print it is extruded for that amount and some more. What happens exactly? Does the filament remain solid in the nozzle? If so, maybe the printer thinks the job is not finished. What does the display show? By the way, which printer are you using? I assumed it to be an Ultimaker 2.
  18. This looks pretty involved (although FSR sensors are the right way IMHO). I hope UM R&D will come up with something ingenious.
  19. Hey danke für den Tipp. Habe mich mit PETx noch gar nicht beschäftigt bis jetzt. Drucke meist nur mit PLA oder XT und hatte keine Probleme das etwas abgeraucht ist. Kommt wohl auf den Einsatz an. Aber ich merke du hast eine ziemlich schlechte Meinung von deinem Drucker. Warum benutzt du es dann? Das mit den Vibrationen habe ich nicht nicht bemerkt - was meinst du genau?
  20. About auto calibration: I strongly disagree! The UM2+ is sold with the Olsson Block with interchangeable nozzles . Every time a nozzle is changed, the bed must be leveled again. Nozzles are cheap (very cheap) so it is perfectly viable to have different nozzles of the same size for different materials (PLA, XT, ABS, Wood, or for different colors). So if you don't print with the very same material for extended periods of time, auto calibration is god send. And by the way, auto calibration takes as long as you set it to. If you don't want a super fine mesh of probed points, then it takes less than 20 seconds. And given that the UM2 heated bed is super stable, it would just need even less than that. Don't forget, 3d printers are for tinkerers and makers too and they tend to fiddle with the printer a lot, including different materials and colors...
  21. I like that feeder of yours sir
  22. @gr5 That's not "easy" If I'd do that for every filament brand I have at home, I would spend the next days watching the printer print those cubes...
  23. I have a very weird problem with the Cura quick profiles. I don't use them much but I just switched to the "normal" profile and back to full settings. Cura asks if I want the profile settings to be copied. I hit "yes" and then I get this: How in the world is this correct? If this happens to others too, then it is now wonder if they get bad prints. How do I reset _all_ Cura settings? I have looked in the following locations and found nothing: (Mac OSX 10.10.5 Yosemite): ~/.cura (here are the settings from the new Cura 15.x) ~/Library/Application Support/ ~/Library/Preferences/ There is no Cura directory there. Inside Cura itself there are some quick profiles but these are distributed with the app which means they are broken by default. However the "normal" profile there one contains only this (/Applications/Cura/Cura.app/Contents/Resources/quickprint/profiles/2_normal.ini): [info]name = Normal print[profile]layer_height = 0.1infill_speed = 80solidarea_speed = 15inset0_speed = 30insetx_speed = 60 Infill speed is way too high btw. Maybe I don't understand how it works, but the other profiles in the "ultimaker2+" directory are weird too. The PLA normal one contains somewhere "nozzle size = 0.35" and "nozzle size = 0.4". I know Cura 14.x will be phased out at some point, but the vast majority of users do use it right now. It would be a good idea to show it some more love and avoid such obvious errors (if these really are errors at all).
×
×
  • Create New...