Dim3nsioneer 558
There is one hangup with the Olsson Block I know of, maybe @labern has it in mind: Since it is deeper in the shadow of the fans, when they suddenly come on you risk getting the heater error and aborting the current print.
The fix is to never let the fans com on full blast suddenly, but gradually.
This is accomplished in settings in Cura.
I see. I never had that problem. I'm still using the original fan shroud. I've put some ceramic tape in between the Olsson block and the fan shroud in order to avoid thermal contact. Could it be that those heater errors rather come from touching heater blocks?
Recommended Posts
Top Posters In This Topic
16
10
8
6
Popular Days
Jan 26
14
Jan 29
11
Jan 27
9
Feb 7
9
Top Posters In This Topic
SandervG 16 posts
ultiarjan 10 posts
Labern 8 posts
gr5 6 posts
Popular Days
Jan 26 2015
14 posts
Jan 29 2015
11 posts
Jan 27 2015
9 posts
Feb 7 2015
9 posts
Posted Images
swordriff 119
There is one hangup with the Olsson Block I know of, maybe @labern has it in mind: Since it is deeper in the shadow of the fans, when they suddenly come on you risk getting the heater error and aborting the current print.
The fix is to never let the fans com on full blast suddenly, but gradually.
This is accomplished in settings in Cura.
Link to post
Share on other sites