3D Prints
1,105 files
-
0 comments
Updated
-
Neuroleptic Jungle Mumbler
By Oliverende
Here is my very big project called "The neuroleptic jungle mumbler" from the so called self painted picture. 29 pieces of ABS , sticked together and smoothed in acetone vapor bath.
Hope you guys enjoy the Making-of video :-)
Mary Christmas!
Cheers
Oliver
1,731 downloads
0 comments
Updated
-
0 comments
Updated
-
Raptor Reloaded hand (printed at 100%)
By tasopoulos
Raptor Reloaded hand (printed at 100%)
1,718 downloads
0 comments
Updated
-
Wolf Skull
By DidierKlein
A wolf skull i printed to demo some vet stuff (soon to come).
Scaled 150% and printed in Ultimaker Pearl White
2,196 downloads
0 comments
Updated
-
Imperator Furiosa
By darkdvd
L'emblème au centre du volant de Furiosa, héroïne de Mad Max : Fury Road
Imprimé en CF20 de Colorfabb avec une hauteur de couche de 0.8 mm (oui, oui).
Buse inox de 0.8
Flow à 100%
Température du plateau : 75°
Température d'extrusion : 260°
Retraction : OFF
Infill : 20%
Dimensions
X : 58 mm
Y : 82 mm
Z : 37 mm
1,541 downloads
0 comments
Updated
-
Boba Fett EE-3
By skinny-kid
Original model by Starjeff is fantastic. Prints easily but will consume a fair amount of filament if printed at full scale. Birthday present for my son who is an avid Star Wars fan. I modified the scope mounts and the scope clamps to accommodate a 4x20 scope and also created the Mandalorian badge to put on the gun. Printed in colorfabb black and then primed and painted.
edit - forgot to add that the stock is printed in 3Dom's Entwined filament (hemp based).
I am working on two other EE-3 blasters as well, one for my other son and one for me
2,043 downloads
0 comments
Updated
-
0 comments
Updated
-
Groovy hand.
By cloakfiend
A quick hand sculpt from a classic scene (i did the face as well but it needs work and i printed it at the wrong scale). might make it into a full prosthetic if i have time.
1,407 downloads
0 comments
Updated
-
0 comments
Updated
-
0 comments
Updated
-
3d Dragon logo
By zpm3atlantis
Für meinen neusten PC Mod benötige ich zwei Drachenlogos, dies ist eins von denen. Bzw. es ist auch der Erste versuch. Auf der Rückseite sind direkt kleine löcher für Magnete. Welche das logo halten sollen.
1,159 downloads
0 comments
Updated
-
Dexter, the Open Source action figure
By nakwada
Material : polymax, made by Polymaker.
This project is sponsored by Dagoma, Filo3D and Makershop.
1,430 downloads
0 comments
Updated
-
3D Skull
This is a small present for a friend. Skulls are a popular request from my friends it seems.
Can't wait for the Pokémon requests (they are already in...)
1,256 downloads
0 comments
Updated
-
kannon image
By inazu
kannon image
The height369mm Left and right.264mm The depth200mm
942 downloads
0 comments
Updated
-
3D printed Kratos
By Gambody_3D
This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:
Quality
Layer height: 0.1mm*
Initial layer thickness: 0.3mm
Bottom/top pattern: lines
Skin perimeter line count: 0
Horizontal expansion: 0.04mm
Speed setups for figure:
Infill speed: 50mm/s
Outer shell speed : 30mm/s
Inner shell speed: 20mm/s
Top/bottom speed: 20mm/s
Support speed: 50mm/s
Travel speed: 150mm/s
Skirt speed: 30mm/s
Amount of slower layers: 4
Speed setups for axes: It is recommended to print the axes at 0.1mm layer height.
Infill speed: 50mm/s
Outer shell speed: 20mm/s
Inner shell speed: 20mm/s
Top/Bottom speed: 20mm/s
Support speed: 30mm/s
Travel speed: 150mm/s
Skirt speed: 20mm/s
Amount of slower layers: 4
Infill:
Infill pattern: Grid
Line distance: 3mm
Infill overlap: 20%
Infill layers: 0
Support:
Enable support: Check
Placement: Everywhere
Overhang angle: 30°
X/Y distance: 0.7mm
Top distance: 0.2mm
Bottom distance: 0.2mm
Stair step height: 0.5mm
Join distance: 0.7mm
Area smoothing: 0.6mm
Use towers: check
Pattern: Lines
Line distance: 1.5mm
Platform adhesion:
Type: Brim
Brim line count: 10 (up to 20, depending on the model’s height)
1,441 downloads
0 comments
Updated
-
Terran Space Marine 3D model
By Gambody_3D
This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:
Quality
Layer height: 0.1mm*
Initial layer thickness: 0.3mm
Bottom/top pattern: lines
Skin perimeter line count: 0
Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).
*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.
Speed setups:
Infill speed: 30mm/s
Outer shell speed : 30mm/s
Inner shell speed: 20mm/s
Top/bottom speed: 20mm/s
Support speed: 50mm/s
Travel speed: 150mm/s
Skirt speed: 30mm/s
Amount of slower layers: 4
Infill:
Infill pattern: Grid
Line distance: 1.5mm
Infill overlap: 20%
Infill layers: 0
Support:
Enable support: Check
Placement: Everywhere
Overhang angle: 30°
X/Y distance: 0.7mm
Top distance: 0.2mm
Bottom distance: 0.2mm
Stair step height: 0.5mm
Join distance: 0.7mm
Area smoothing: 0.6mm
Use towers: check
Pattern: Lines
Line distance: 1.5mm
Platform adhesion:
Type: Brim
Brim line count: 10 (up to 20, depending on the model’s height)
Other 3D printing recommendations:
Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default.
Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.
1,475 downloads
0 comments
Updated
-
Kayle 3D Print Model
By Gambody_3D
This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:
Quality
Layer height: 0.1mm*
Initial layer thickness: 0.3mm
Bottom/top pattern: lines
Skin perimeter line count: 0
Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).
*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.
Speed setups:
Infill speed: 50mm/s
Outer shell speed : 30mm/s
Inner shell speed: 20mm/s
Top/bottom speed: 20mm/s
Support speed: 50mm/s
Travel speed: 150mm/s
Skirt speed: 30mm/s
Amount of slower layers: 4
Infill:
Infill pattern: Grid
Line distance: 3mm
Infill overlap: 20%
Infill layers: 0
Support:
Enable support: Check
Placement: Everywhere
Overhang angle: 30°
X/Y distance: 0.7mm
Top distance: 0.2mm
Bottom distance: 0.2mm
Stair step height: 0.5mm
Join distance: 0.7mm
Area smoothing: 0.6mm
Use towers: check
Pattern: Grid
Line distance: 1.5mm
Platform adhesion:
Type: Brim
Brim line count: 10 (up to 20, depending on the model’s height)
Other 3D printing recommendations:
Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default.
Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.
4,157 downloads
-
Smooth cathedral model
By viralata
An experiment with Blender soft bodies to use Gaudi's technique to automatically design the optimal shape of a roof.
The video here explains the modelling process in blender.
883 downloads
0 comments
Updated
-
Faceted cathedral model
By viralata
An experiment with Blender soft bodies to use Gaudi's technique to automatically design the optimal shape of a roof.
The model has been then decimated to have a more contemporary look compared to the original one here:
https://ultimaker.com/en/community/prints/4916-smooth-cathedral-model
More info here:
862 downloads
0 comments
Updated
-
Pokémon gifts for my nieces.
Printed these 2 Pokémons with 25% infill so their weight is enough to act as real statues for my nieces.
They love it!
Instagram post here.
1,123 downloads
0 comments
Updated
-
Tesla Power Armor 3D model Printing Details
By Gambody_3D
This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:
Quality
Layer height: 0.1mm*
Initial layer thickness: 0.3mm
Bottom/top pattern: lines
Skin perimeter line count: 0
Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).
*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.
Speed setups:
Infill speed: 50mm/s
Outer shell speed : 30mm/s
Inner shell speed: 20mm/s
Top/bottom speed: 20mm/s
Support speed: 50mm/s
Travel speed: 150mm/s
Skirt speed: 30mm/s
Amount of slower layers: 4
Infill:
Infill pattern: Grid
Line distance: 3mm
Infill overlap: 20%
Infill layers: 0
Support:
Enable support: Check
Placement: Everywhere
Overhang angle: 30°
X/Y distance: 0.7mm
Top distance: 0.2mm
Bottom distance: 0.2mm
Stair step height: 0.5mm
Join distance: 0.7mm
Area smoothing: 0.6mm
Use towers: check
Pattern: Lines
Line distance: 1.5mm
Platform adhesion:
Type: Brim
Brim line count: 10 (up to 20, depending on the model’s height)
Other 3D printing recommendations:
Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default.
Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.
4,663 downloads
0 comments
Updated
-
Adam Jensen from Deus Ex
By 3doftom
A zbrush sculpt of Sander... Adam Jensen from the game Deus Ex: Mankind Divided. I still need to clean it up some, but I was too excited to take some pictures and post it
1,741 downloads
0 comments
Updated
-
Scorpion 3D Model from Mortal Kombat
By Gambody_3D
Quality
Layer height: 0.1mm
Initial layer thickness: 0.3mm
Bottom/top pattern: lines
Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).
Speed setups:
Infill speed: 50mm/s
Outer shell speed: 30mm/s
Inner shell speed; 20mm/s
Top/bottom speed: 20mm/s
Support speed: 50mm/s
Travel speed: 100mm/s
Skirt speed: 30mm/s
Amount of slower layers: 4
Infill:
Infill pattern: Grid
Line distance: 3mm
Infill overlap: 20%
Infill layers: 0
Support:
Enable support: Check
Placement: Everywhere
Overhang angle: 30
X/Y distance: 0.7mm
Top distance: 0.2mm
Bottom distance: 0.2mm
Stair step height: 0.5mm
Join distance: 0.7mm
Area smoothing: 0.6mm
Use towers: Check
Pattern: Lines
Line distance: 1.0mm
Platform adhesion:
Type: Brim
Brim line count: 10 (up to 20, depending on the model's height
Other 3D printing recommendations:
Outer Shell Speed - 20mm/s and Support Speed - 40mm/s setting apply to avoid model deformation. Other settings by default.
Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.
1,857 downloads
0 comments
Updated