RogueWave

latest firmware installed yesterday and firewall disable I tried looking for the folder with third party materials and/or Ultimaker's materials but could not....any idea where?

when I try your suggestion warning ATTENTION materials do not match between Cura and printer settings. Their is a override box with a warning printer damage possible with wrong confirmation...... Should I OVERRIDE?????

It's on an Network.....

Jabil is selectable in Cura but does not show on selecting a material on my S5.....there are other third party filament available...uninstalled and installed Jabil but no luck What's the next step? Thanks Cura 4.9.1

Thanks for the epoxy tip with mold making .......will keep it in mind sounds like a solid method to get what's needed...... already bought the TC Clear ......checking several different sources, let's about 90% of the light through.......the rest fog like

Thanks for the tip on elmers wood glue watered down.......a have a about a gallon of it.......

I dry my PVA for about 20 hours before printing, then.... when printing have dryer temp at 35C Try loading material process of PVA and after pressing confirm, PVA starts flowing......look for issues

Difference between hell and heaven S5 is my heavenly delight

Thanks for the tip ColorFabb HT Clear Filament - 2.85mm (0.70kg) | MatterHackers $50.00 Free shipping

Need a clear filament for reproduction of a old search light "lens" on a boat. Hopeful just like a glass pane on a window......is something like that available or maybe close to it??? Thanks

Well Spoken ......I am doing the same

1) I made molds and poured metal before know the methods 2) S5 I think has enough build area to make the part (computer, battery, sensors etc ) 3) so what material to use? Carbon Fiber ????? need to know that or maybe have S5 make a part (empty inside) drop it down in 50 meter depth and see the results????? then try a 100 meters?

Making a water proof container hope able to be crush proof down to 100 m depth in the ocean. Parts will be modular printed on my S5 looking to match up glue with the needed material (filament) or should it be the other way around???? Any idea are welcomed !!!!!!! Thanks

Plastic is the future ..........but no need for fancy logo and carboard wrapping .....double wrap in plastic, label type of material on spool is fine....then UM......... it helps a little .....but the huge problem is with auto makers, boat engines and old diesel motors. And lets not forget airplanes, cruse ships, ferries, trains and the like....and electric cars at $100,000 does not help moving to new technology....

Print at the angle one corner to another for the largest size SOMETIMES IT WORKS!

send your tiger stuff to Hollywood.... will be used in the next big war movie..... great illustrations

thanks for the tips .....good suggestions the mesh tool plug-in works well but needs a little touch up for example, xyz locations in Blender should be set to zero in Cura otherwise the model is far far away from the build plate....Good Job overall

Set up Units setting in FreeCad to mm then import into Cura excellent results Set Units in Blender to m or mm or cm import into Cura scales model up to ten thousands percent or more Imperial units in Blender Cura goes crazy no original model even using "convert to metric" plug-in is their a solution to this problem? Thanks Cura 4.8 Blender 2.92

4.9 did not print from second nozzle for the first layer on my S5. Aborted ...... Excellent print on 4.8

Thanks Ady for pointing me to Post Processing..... Now I know what it means

PVA in water temp 125 degrees F for over two hours turned into a gel state and overnight room temp 70F and some dissolved in the water but a glop of gel remained.....Yah, hard stuff to remove.....

After Cura has print 9.1 mm height in the Z axes, stop the print, and insert nut in model. How is it done? Search in Cura "pause" not helpful Thanks

My advice is go back to 4.8 ... I did save time too many issues with 4.9 I had the same problem no sync, and 4.9 is very slow on input new numbers in settings on my AMD Threadripper

Famous Wind Turbine Ultimaker 4.9 new release small portion of inside wing printed .....left out over 90% of wing front right wing wing collapsed on collision with nozzle infill poor other wing solid S5 default PLA settings cubic subdivision