So I tested a few things.... They might be somewhere in this thread.
The favorite settings isn't yet working. They just copy the last adjusment you make to favorite.
The Post-Processing didn't work. I set mine to pause at 3 mm, but it just continued.
The Cut-off Object Bottom is improved out of the two tests I was running, one of them has failed and the other has succesfully printed from the point where I said it had to print.
In the new cura 15.0 you have said that the saving works way better than before. If I want to save everything which stands on my bed, I have to make a selection, out of everything, and then I can only save selection to file instead of save all....
I had a few times my software was mirrored somehow and a few seconds later it's normal again.
When I´m in layered mode and I would like to move one of my objects, a blackish silhouette of my object comes out and the object itself doesn´t move at all.
When saying how much time it would take to print this object, the counter would say 6:35 m, which I thought would be 6 minutes and 35 seconds. But later I found out it meant 6 hours and 35 minutes.
Though I do have to say that I can manipulate multiple objects at once, which is nice when working with scales and such.
I hope to give you enough information and futhermore I hope that I haven't said to much that already has been said. Thanks in advance
Recommended Posts
Top Posters In This Topic
69
13
13
10
Popular Days
Sep 4
15
Sep 22
14
Mar 12
10
Sep 10
9
Top Posters In This Topic
nallath 69 posts
peggyb 13 posts
ultiarjan 13 posts
ahoeben 10 posts
Popular Days
Sep 4 2015
15 posts
Sep 22 2015
14 posts
Mar 12 2016
10 posts
Sep 10 2015
9 posts
Posted Images
Slive 0
Thanks nallath for the hard work.
I also noticed that the machine profile ultimaker2_extended.json is not complete yet (we own the extended).
In the next release can we just take the ultimaker2.json and change "machine_height": { "default": 205 } to "machine_height": { "default": 315 } to get the extended to work?
Thanks again!
Link to post
Share on other sites