As for me, I got the docking and print head parts printed ready for my UM2+ to arrive so I can start tinkering with it.
Just checking.... "or my UM2+ to arrive" I hope you don't mean you're waiting on a NEW um2+ to arrive? Did you read the latest Ultimaker 2's are MISSING THE 5th DRIVER so you can not control the 2th extruder?
It's mentioned on the site and in the BOM, but just thought I notice it again to be clear. ultimaker can not give an exact moment they changed the electronics, but roughly on machines from end 2016 - 2017 you should check if you still have the 5th driver on the main board.
I think an important nuance is, it may be missing. Getting exact clarity on this has been difficult.
Recommended Posts
Top Posters In This Topic
90
81
72
66
Popular Days
May 5
30
Mar 24
25
May 4
23
May 6
22
Top Posters In This Topic
RudydG 90 posts
foehnsturm 81 posts
tinkergnome 72 posts
ultiarjan 66 posts
Popular Days
May 5 2017
30 posts
Mar 24 2020
25 posts
May 4 2017
23 posts
May 6 2017
22 posts
Popular Posts
rigs
@zerspaner_gerd & @MarcoUbtz Thank you gentlemen, everything is working perfectly now https://www.youmagine.com/designs/flexible-coupler-using-colorfabb-ngen-flex
zerspaner_gerd
Already found?? Here are my noted links: https://forum.simplify3d.com/viewtopic.php?f=8&t=1959
morfeushav
I am creating too a holder for mount the clamping dock on a ultimaker 2 aluminum clone. I haven´t have yet the final part., and I have to test it. This is how looks
Posted Images
foehnsturm 970
Cura has a ton of speed / acceleration / jerk settings for travel, infill, walls support etc.
If you like you can activate these in the "manage printers - settings (speed section)" window and set your own values.
Link to post
Share on other sites