I too have only had the autoleveling fail on the S5 infrequently -about 5 times in the 3 months I have had it. Every time it was some filament stuck to the nozzles.
There are problems with the S5, but the auto level is not one of them in my opinion.
Recommended Posts
Top Posters In This Topic
89
40
38
36
Popular Days
Apr 23
76
Apr 19
32
Nov 2
31
Apr 26
30
Top Posters In This Topic
kmanstudios 89 posts
SandervG 40 posts
Shadowman 38 posts
uncle_bob 36 posts
Popular Days
Apr 23 2018
76 posts
Apr 19 2018
32 posts
Nov 2 2018
31 posts
Apr 26 2018
30 posts
Popular Posts
Daid
Problem was that dilithium was very difficult with legislation, being an accidental space-time warp risk. So we removed that feature last second.
Daid
It's bigger. 330x245x315mm to be exact. And that volume can be used by BOTH nozzles. No more less volume for dual extrusion prints. It has a flow sensor, that works for jam detection as we
foehnsturm
As for the flow sensor. We (the Mark2 crowd ) almost finished development for an external flow sensor for the UM2+ including firmware integration. Mechanically it fits to the UM3, but connecting to e
Posted Images
Smithy 1,146
So, not so much auto leveling iterations when you level once per week ? Sorry couldn't resist ?
I have no issues with auto leveling with my S5 and not with the UM3. Only one time, the leveling failed on the S5, but there was a blob on glass which I have overseen.
Link to post
Share on other sites