Well, still waiting 9+ months for fixes to basic functionality would drive even Yoda crazy
- 1
Well, still waiting 9+ months for fixes to basic functionality would drive even Yoda crazy
Nope it would not as he could forsee the future and understand why it takes that long...
I can't say more than "there is a reason..." (and it's a good reason imo)
Edited by GuestNope it would not as he could forsee the future and understand why it takes that long...
I can't say more than "there is a reason..." (and it's a good reason imo)
UM secretly infected our computers using the site and cura and is using that computation power to design a new 3D printer?
I am curious for the reason, I cannot think of a single one, other than a switch to a proven forum package, but in that case I'd announce it...
@bob-hepple - the forum was moved to AWS recently and that introduced a bunch of new bugs. That "security warning" - when you see it, replace the website with "ultimaker.com". Same with broken links - if there is a broken link, replace the website with "ultimaker.com" (instead of the aws website).
For those unfamiliar with URLs - they are of the format:
https://xxx.yy.zz.aa.bb.cc.dd.ee.com/other/stuff/andmorestuff?goes=here#innertag
The portion with all the dots is the website/webserver address. That's the part you have to remove and replace with ultimaker.com. The address of the webserver is between two slashes so it will have no slashes in it but will have some dots.
That's it,
introduced a bunch of new bugs.
Why are new bugs caused, instead of first solving the old ones? :(
Totally agree
I'm noticing that YouMagine is ever so slow, too.
Will that see the same improvements?
I think feed back on the feed back by ultimaker might help to ease fustrations even if it's a statement where they explain they aren't able to address it.
but things that are being looked at could do with a comment or even an alert on the post to say Ultimaker acknowledges this post. I think at the moment we are assuming they have seen the post but some posts expand really quickly.
+1 minute just to load the main forum page... :(
I think at the moment we are assuming they have seen the post but some posts expand really quickly.
This is a pretty safe assumption. UM is working on it.
@lepaul: Youmagine is not maintained by the same people as the UM website afaik.
Hi guys, thank you for your feedback!
Like @Dim3nsioneer says, we certainly read all feedback and make sure it is documented too. My apologies if a reply/confirmation does not always follow immediately. Like stated above, some bugs have been hunting us for over a couple of months. When a bug is reported for the so manieth time, but for the first time by a different user, a deceptive and easy culprit to fall into is to think the bug is already 'acknowledged' and replied to. For that moment not realizing the source is different, when it is just the receiver who is the same.
Right now, I am not really allowed to be specific about the exact solution we are working on since it is not entirely clear and set in stone yet (and we have learned our lesson about false promises), but please take comfort in knowing your feedback, and the accumulated feedback over the last many months is really taken seriously and a solution should be presented (hopefully) soon.
Thank you for your time and understanding.
Hi guys, thank you for your feedback!
Like @Dim3nsioneer says, we certainly read all feedback and make sure it is documented too. My apologies if a reply/confirmation does not always follow immediately. Like stated above, some bugs have been hunting us for over a couple of months. When a bug is reported for the so manieth time, but for the first time by a different user, a deceptive and easy culprit to fall into is to think the bug is already 'acknowledged' and replied to. For that moment not realizing the source is different, when it is just the receiver who is the same.
Right now, I am not really allowed to be specific about the exact solution we are working on since it is not entirely clear and set in stone yet (and we have learned our lesson about false promises), but please take comfort in knowing your feedback, and the accumulated feedback over the last many months is really taken seriously and a solution should be presented (hopefully) soon.
Thank you for your time and understanding.
would it be possible that an Ultimaker rep only flag is created so when you guys have read the post you can use the Flag to highlight that it has been read. it may help in the duplication of the post by other people.
totally understand that there is limited disclosure if any. But it may go a long way just to know that one of you guys has read the post with the issue presented on it.
I am pretty confident that you read pretty much all of them, otherwise some of the solutions you have come up with would not have appeared at all. but from reading through this very long post there are quite a few who doubt because it seems that it's not being read or actioned.
I call it 'the feel good factor'
Currently, such a feature is not supported by our forum, but I am also not sure if it would work. In this specific scenario, it would mean someone would have to read at least the last 5 pages to see if something was already reported. And I think we should be glad for everyone who takes time to write down their feedback, instead of just abandoning us. And we should keep that reporting-barrier as low as possible.
What we do need, is just less bugs
I'll do my best to contribute more to that feel good factor Thanks!
Here is a positive update; the DNS configuration error that has been plaguing us for some time has been fixed. No more aws url's. Sharing a reply, logging out works again as normal.
I can confirm the error has gone on my machine Phew
Thanks8)
Here is a positive update; the DNS configuration error that has been plaguing us for some time has been fixed. No more aws url's. Sharing a reply, logging out works again as normal.
It does not if you select the online documentation menu item in Cura. At least not for me.
Like stated above, some bugs have been hunting us for over a couple of months.
That is certainly an understatement...some things have been broken since the dawn of 2017...
Recommended Posts
SandervG 1,521
Hi @nilrog, just wanted to say I saw your tweet about the major issues on our forum. I was writing a reply but something came in between and unfortunately, it never left draft-mode. I figured there was a bigger chance you would read my reply here (plus, I have more characters:))
We're aware of them and improvements are coming. We'll keep you posted via our forums about the progress, and as soon as I have specific information you guys will be the first to know. Our apologies for any inconvenience and my deep gratitude for sticking with us through some of these frustrating phases.
Link to post
Share on other sites
nilrog 103
Good...I hope its coming soon @sandervg
I really like my Ultimaker and there is still interesting stuff discussed here...otherwise I would have dropped off long ago
Link to post
Share on other sites
Titus 170
1)
As far as "confirmed" can go, when clicking the bell and using middle mouse to open notifications in new tabs, after the first new tab, the pages start from the top instead of from the new post.
2)
Another issue is that if you click in "unread posts" on a topic that you have never read before you are not taken to the first post...you are taken to the first reply...
Link to post
Share on other sites
bob-hepple 59
I see a lot of talk about fixing issues with the forum but nothing is happening even security warnings as reported???
Link to post
Share on other sites
nilrog 103
That's why we are all complaining
Some issues are almost a year old and still going strong... :angry:
I only visit here now because some of the interesting stuff is still posted here...but it is not with yoy...and it is easy to miss things since even such a basic thing as forum navigation is broken :(
Link to post
Share on other sites
Dim3nsioneer 558
We all would like to happen it faster but some (good!) things just need their time...
Edited by GuestLink to post
Share on other sites