Jump to content
Ultimaker Community of 3D Printing Experts


  • Content Count

  • Joined

  • Last visited

Everything posted by qwerty8224

  1. Thank you for the project yyh1002 2021 the system works and brings pleasure and joy)))))
  2. amazing project. I have been using it for 4 years with Bondtech Gears 1.75 5mm. thanks
  3. For those of you who already bought the 3015 fans, there is still a fan shroud variant to use 3015 with v1.5. Unfortunately I can not find it (((
  4. qwerty8224


    О да вашейв😉your builds are wonderful))) keep up the good work))))
  5. GR5 I do not want to offend you, but it seems to me that you are not pursuing a good goal - to say that one is better than the other, and give an example of the testing that was. You are an adult and should understand that these are two different approaches to cooling. I will explain to inexperienced people (like you) UM2 (which has been tested) uses cooling on one plate, that is, 1 nozzle through this plate heats the other nozzle. DXU uses a separate cooling system for each nozzle. There is a separate radiator. Such a system costs UM3 and S5, and the temperature of the first or secon
  6. Я построил DXU))) спасибо за отличный дизайн, который мне действительно нравится))) осталось подружиться с ним или приручить этого зверя)))
  7. Thanks to ALL the developers of the Cura 3.5 3.6 chicken works well (the extruder moves exactly on the tower) I love it 😜 the print is very good 🤗 tinkergnome I want to ask this project DXU UM2 much better? (as viewed from the firmware side) Should I switch to it?
  8. smartavionics Dropbox win64.exe very very good ?
  9. thanks to everyone who took part in the development ... my prints have become even better))) you make me happy)))))))
  10. Again broke Cura 3.4 (((. Printing PLA support PVA Mark2Tweaks.py does not work. Command Ultimaker ???
  11. tinkergnome Thank you for not forgetting about this wonderful project Mark2 .... installed Mark2Tweaks.py (cura-3.2-resources) and my 2 nozzles became just fine to work with. Stopped to visit the place 1 nozzle all super I'm very happy))))) And again thanks to everyone who took part in the development of this project YOU gave us the opportunity to get acquainted with two-tone printing at minimum cost. ))))
  12. correct please definition of nozzles for Сura 3.4 [values] machine_nozzle_size = 0.6 machine_nozzle_tip_outer_diameter = 1.25 coasting_volume = 1.36 speed_wall = = round (speed_print * 4/3, 1) speed_wall_0 = = 1 if speed_wall <10 else (speed_wall - 10) speed_topbottom = = round (speed_print / 2, 1) then what is highlighted should be removed .... I have to Cura 3.4 works.
  13. as always, I like everything))) but it's a pity that many excellent fixations from smartavionics did not get into this assembly (((. thanks to everyone who takes part in the development.
  14. Thank you. Then I will look for the best results with different types of plastic.
  15. smartavionics I tried this function and it's just great. This is what we have so long lacked .... Thanks again You are moving in the right direction))) and all your efforts I think highly appreciated by the community. At least me))) Continue to please us further))) Is it worth waiting for the improvement of this function?
  16. Сura 3.2 2 nozzle visits the place of the 1st nozzle ?
  17. smartavionics I want to say thank you for your contribution to Cura you are the only one who optimizes the algorithm and not just writes it))))) And you do it very very well. It is interesting to know how much% of the installation has increased Сura 3.0.3 with the function entry"Optimize Wall Printing Order" ))))) Good luck )
  18. The error appears when there is nothing to optimize))) But there is a check mark for optimization. I will not disable this feature .... no way I will be a good tester))))))))
  19. Cura 3 beta very very good. Thanks to everyone who takes part in the development Сura . I want to say a special thank you third-party developer "smartavionics" for the function Optimize Wall Printing Order .... and his other achievements. Sorry for my English ( Thank you again from version 2.1 to 3.0.0 done a great job that deserves praise.
  • Create New...