Topic for fan Shroud is here.
http://umforum.ultimaker.com/index.php?/topic/10554-um2-fan-shroud-replacement/?p=102188
There are a couple of people testing it for me, but will be on youmagine shortly.
Topic for fan Shroud is here.
http://umforum.ultimaker.com/index.php?/topic/10554-um2-fan-shroud-replacement/?p=102188
There are a couple of people testing it for me, but will be on youmagine shortly.
hi !
various test with bronzefill
@rigs: nice result, how did you get the colors, blue and green?
I got some nice results with the old S39 tin flux with acid. Just let it dry overnight and rinse of the residue and let it dry. (the picture was before the rinse, the green becomes lighter)
Did you use ammoniac for the blue?
@rigs: nice result, how did you get the colors, blue and green?
I got some nice results with the old S39 tin flux with acid. Just let it dry overnight and rinse of the residue and let it dry. (the picture was before the rinse, the green becomes lighter)
Did you use ammoniac for the blue?
A friend ( Panoramix ) gave me the recipe for a magic potion
1 part salt
1 part ammoniac
1 part vinegar
Apply with a brush and out !
For the green must be quick drying
For blue must drying overnight
Good luck !
Printed this in 1/87, ABS white.
Cheers
Kris
A friend ( Panoramix ) gave me the recipe for a magic potion
Those druids always have some interesting secrets
So quiet in here since the forum update
To me it looks like the "Prints" section is supposed to take that content now.
However, if so the default sorting order there makes no sense. I should be latest first not best rated first.
Yeah, it looks like that's the idea. The thread had a pretty good run though, 3 years, 3000 posts and a quarter million views. Not too bad.
I agree with foehnsturm though, you can't even choose "Latest first" as a sort option. Makes it harder to just have a quick look at what the latest prints are. I have a feeling there wont be much discussion going on either. Oh well.
Lets just keep on using this tread for anything that needs additional comments, and only the "super fine final prints" for the prints section...
Here's my ;latest print. wanted to test the support of Simplify3D, like it, easy to remove and easy to manually place.
Made this little bronzefill thing cause I need a few tests for a mini tumbler I'm currently building...
Edited by GuestYeah the new forum is a little tricky to get around.
Very interesting print! Would you mind elaborating on what exactly it is we are looking at?
What did you do to post process?
did you print everything we see?
I reckon the apple would of exploded
Cool print.
The "Print Section" is actually quite good. I also think that we should further use this thread as a general Discussion platform. Would be nice if we could easy link to the print item in the galery, no?
Maybe I missed that, but can you not direclty link to pictures in the Print section but only to pictures from your Gallery? Would be cool if we would be only required to have ONE Gallery not Gallery AND Print (I hope you get it).
Anyway Pictures of my grips for my youngest son printed in Blue NinjaFlex:
and the link to the Print.
That's a good suggestion for further developments i think
And please add click and zoom on pc and mobile device...
That is indeed a good point, I will include it in our to do list, just like zoom (which was also mentioned before.)
For now I think you have found the best solution yourself already, by adding a link.
Thank you, very cool print!
No problems using Ninjaflex?
I have also printed a watch from Ninjaflex, really cool stuff!
Thanks @SandervG, yes, Ninjaflex is really cool. I love the touch and feel. I also printet one of the small waving octopus with 10% infill. Really squishy and great to touch.
Would you mind showing your watch? I love watches...
In general, yes, not easy to print at all with a bowden based system. For me those things helped (I have a lot of those points from the forum!):
Might be easier to print with SemiFlex (as stiffer) but was not able to test it out.
Edited by Guestjep, Robert and Foehnsturm
that is always the problem when somebody gets the pin in his head that something well running has to be improved. In most cases no improvement but confusion. Really a bad idea not to offer a "latest first" sort option. For me also annoying this top bar going always up and down when scrolling the forum list with mouse wheel.
But... it's their decision - I'm only a dumb user. They can to with their forum whatever they like to do of course and I also realize that there's no development without improving but for me it was somehow disappointing. I also see that at any change there will be people complaining... so please give a sh... on my comment. I was ready to post some new prints I made but now I lost motivation somehow. Nevertheless I have to say thank you to the Ultimaler staff that they are running a community site which is really helpful. So maybe I have to take a cup of tea and calm down :-)
Edited by GuestVery interesting print! Would you mind elaborating on what exactly it is we are looking at?What did you do to post process?
did you print everything we see?
Thanks! It's a print based on the high speed photography experiments by Harold Edgerton, everything was printed on an Ultimaker2, .1 layer, .08 wall, 10% infill, 10% line support. Designed/kitbashed using tinkercad and meshmixer.. Post process involved lots of chanting and elf tears.
Posting a link to a larger photo has other problems - mainly the link will break "soon". If you use imgur it will probably break within a few months. If you use drop box it will break when you clean up your drop box because you ran out of space. And so on. And it would be nice if these photos lasted for years and not months or even just a few days.
Recommended Posts
Top Posters In This Topic
362
282
221
179
Popular Days
Jan 5
30
May 12
26
Jan 13
23
May 1
22
Top Posters In This Topic
ian 362 posts
cloakfiend 282 posts
skint 221 posts
SandervG 179 posts
Popular Days
Jan 5 2014
30 posts
May 12 2014
26 posts
Jan 13 2014
23 posts
May 1 2014
22 posts
Popular Posts
kmanstudios
Took me forever to do this. And it is still rougher than I would have liked. 3D concept rendering: Finished piece:
kmanstudios
I just finished this. It was a multi-part print for ease of painting. Some of it I am not sure what happened...but hey, it is purty....And, I am unanimous in that ? Test Render Parts
gr5
Bath interferometers. I have made about 20 of these for people who use them to test their telescope mirrors. They are amazingly accurate and can do better than a $40,000 Zygo PSI optical tester. Th
Posted Images
solid-print-3d 30
What fan shroud did you try?
Link to post
Share on other sites