Nop no progress no nothing. It just sat there spinning while I was looking at the clock which told me I had 10 minutes left to upload
- 2 weeks later...
Dim3nsioneer 558
Hey @SandervG, what about adding some drop-down boxes or similar to the personal profiles for describing what modifications were made on the printers a user owns? This would give your R&D department some interesting information and would make helping people a bit easier sometimes (if people fill in something, I know...).
btw: I had to use a link around "R&D", otherwise a hyper-clever-routine makes a from the D...
Edited by GuestCool idea!
Do you use the people section a lot?
Regardless I think it is a good idea, but I was wondering since you also have your hardware listed next to your post. When do you find this info or would you go look for it?
Dim3nsioneer 558
Well, I wouldn't squeeze even more information into the short text next to posts (imagine, people with five printers like you would have 3 mods for each printer listed there...). But some pop-up (as with the likes) could reveal that information (so it is available while writing an answer to a post). And of course the people section.
Edited by GuestI have just been going through the forums on my mobile and as I was scrolling I accidentally touched the flag post as inappropriate. The problem is I can't unflag it. I have tried tapping it again but it stays flagged. Now I feel stink about flagging a post with no issues. Can you please allow it to be un-flagged by the person who flagged it?
haha labern, bully
- 1
So we finally caught the flag-troller! AHA
No worries, every now and then we receive a reported post but often it is by mistake (sometimes people click it instead of like).
I don't think anyone sees that a post is flagged except moderators?
- 2 weeks later...
Oh bugger, @labern is the one ruining our fun
- 1
So we finally caught the flag-troller! AHA
No worries, every now and then we receive a reported post but often it is by mistake (sometimes people click it instead of like).
I don't think anyone sees that a post is flagged except moderators?
what's the ETA for an improved (and working) search functionality on this forum?
I would temporary remove the search field until it works because it's frustrating to use it right now
I know it is not working perfect yet (perfect in a not very demanding-definition) but I usually use it when looking for other users.
About an ETA until it works closer to a more reasonable demanding definition, currently I'm not in the office so I can't verify with my colleague. I'll try to get an eta, but i can already tell you it will be an educated guess, not a guarantee.
I know it is not working perfect yet (perfect in a not very demanding-definition) but I usually use it when looking for other users.
About an ETA until it works closer to a more reasonable demanding definition, currently I'm not in the office so I can't verify with my colleague. I'll try to get an eta, but i can already tell you it will be an educated guess, not a guarantee.
The search for users is working yes, but that's imo 1% of all the search queries you should receive on your site
Many of the threads on this forum contain very valuable information for new users, but they have to use Google to find them.
I search like this to find information on this forum for example about "Olsson"
But that's not the way to go imho? (and not everybody knows the "site:" feature of Google )
Oh bugger, @labern is the one ruining our fun
Yep, I accept bribes from anyone who doesn't want to be flagged.
Sounds like the Italian maffia. Never knew the New Zealand maffia was alike
- 2
I'm just trying to build up my posse before I take over the forum.
- 1
Dim3nsioneer 558
I'm just trying to build up my posse before I take over the forum.
Thinking big of a man who prints small... it's usually called compensation...
@SandervG: Your list of printer is producing much white space... think of when the new forum started... this time it will be your fault...
Edited by Guest
I'm just trying to build up my posse before I take over the forum.
Thinking big of a man who prints small... it's usually called compensation...
@SandervG: Your list of printer is producing much white space... think of when the new forum started... this time it will be your fault...
You are right! I think I'll just have to write very elaborated replies from now on to compensate for the white space
Edited by Guest
I'm just trying to build up my posse before I take over the forum.
Thinking big of a man who prints small... it's usually called compensation...
@SandervG: Your list of printer is producing much white space... think of when the new forum started... this time it will be your fault...
You are right! I think I'll just have to write very elaborated replies from now on to compensate for the white space
You havent even added your UM2+ models yet. your printer list will be like a novel soon
haha yeah I may need to start prioritising the list
Otherwise I have to include an index list as well
aggertroll 12
I browse forums almost exclusively on my ipad and use the "open in new tab" a lot. Lets me close the tab after reading and be back where I started from with one click and without reload.
I find I can not do that on this forum. No matter what I do, following a link will open that page in the same tab. Is there a setting somewhere that allows me to use the "open in new tab" function without changing the page in the original tab? (I hope you can figure out what I'm trying to describe.)
So Many GHOST NOTIFICATIONS :(
yeah same here.. i was coming back to the forum.. posting a bit.. but now i get all kinds of ghost notifications annoying the hell out of me..
I browse forums almost exclusively on my ipad and use the "open in new tab" a lot. Lets me close the tab after reading and be back where I started from with one click and without reload.
I find I can not do that on this forum. No matter what I do, following a link will open that page in the same tab. Is there a setting somewhere that allows me to use the "open in new tab" function without changing the page in the original tab? (I hope you can figure out what I'm trying to describe.)
have the same problem in different browsers on an ipad. what i do as a workaround: hold your finger until the context menu opens. now instead of lifting your finger, first move a bit up or down. it will scroll the page and if you now lift your finger, nothing loads unintentionally.
- 1
Recommended Posts
Top Posters In This Topic
297
137
93
92
Popular Days
Apr 30
43
May 8
33
Apr 23
33
May 9
32
Top Posters In This Topic
SandervG 297 posts
Titus 137 posts
ultiarjan 93 posts
LePaul 92 posts
Popular Days
Apr 30 2015
43 posts
May 8 2015
33 posts
Apr 23 2015
33 posts
May 9 2015
32 posts
Posted Images
SandervG 1,521
@titus, the last thing you mentioned is a bug. It will probably be fixed in the next launch.
Not sure exactly what you mean with your first feedback?
There should be a progress-bar while uploading the picture.
You didn't see any?
Link to post
Share on other sites