Jump to content

ULTIMAKER 3 (DUAL EXTRUSION?)


nerdwarrior

Recommended Posts

Posted · ULTIMAKER 3 (DUAL EXTRUSION?)

Hey guys so it's been a while since I visited the Ultimaker website and as soon as I came on I saw the Ultimaker 3 thing and I watched the vid.

AND I THINK IT'S GOT DUAL EXTRUSION.

That print that they show has some crazy overhangs, and when the color briefly changes towards the end, it seems to show the print stuck in a block of yellowish plastic THAT LOOKS JUST LIKE PVA and I remember that somewhere in the forum Daid or someone (sorry if I got the name wrong) said that dual extrusion was the most-wanted feature and that it would be one great thing to add.

SORRY FOR MY RAMBLING AND HORRIBLE GRAMMAR BUT I'M SO EXCITED.

Can someone please confirm for me that what I saw was dual extrusion?

Sincerely,

nerdwarrior

  • Like 1
Link to post
Share on other sites

  • Replies 403
  • Created
  • Last Reply

Top Posters In This Topic

Posted · ULTIMAKER 3 (DUAL EXTRUSION?)

Yes it has dual extruder, for printing soluble supports.

 

YESSSSSSSSSSSS I wonder how they approached it. Prusa and Prometheus System Y-splitter style? Or BCN3D independent extruders? Or something else entirely?

 

Yes it will be extremely expensive.

 

First reaction: LOL dat was so good **like for you**.

Second reaction: Well Ultimaker isn't exactly cheap, is it? **sigh**

  • Link to post
    Share on other sites

    Posted · ULTIMAKER 3 (DUAL EXTRUSION?)

    Second reaction: Well Ultimaker isn't exactly cheap, is it? **sigh**

     

    :)

     

  • Link to post
    Share on other sites

    Posted · ULTIMAKER 3 (DUAL EXTRUSION?)

    what is extremely expensive? 5k?

  • Link to post
    Share on other sites

    Posted · ULTIMAKER 3 (DUAL EXTRUSION?)

    Well I guess the definition of "expensive" varies from person to person.

    If Ultimaker went for a simple dual extrusion solution it might still hover around the $2500 mark.

    But maybe this time it will reach 3k or sth because of the dual extrusion.

    Not sure.

    Your guesses?

  • Link to post
    Share on other sites

    Posted · ULTIMAKER 3 (DUAL EXTRUSION?)

    i think support material will be different to release from the actual print without any damage...

  • Link to post
    Share on other sites

    Posted · ULTIMAKER 3 (DUAL EXTRUSION?)

    i think support material will be different to release from the actual print without any damage...

     

    What? I'm sorry, but I frankly didn't understand half of that. Damage? To what?

  • Link to post
    Share on other sites

    Posted · ULTIMAKER 3 (DUAL EXTRUSION?)

    O hey Ultimaker released a new teaser vid with a green and black drill.

    Man those colors look crisp!

  • Link to post
    Share on other sites

    Posted · ULTIMAKER 3 (DUAL EXTRUSION?)

    According to the teaser, it clearly has dual extrusion. But the printed part looks a bit warped, so I guess it has no enclosure.

  • Link to post
    Share on other sites

    Posted (edited) · ULTIMAKER 3 (DUAL EXTRUSION?)

    According to the teaser, it clearly has dual extrusion. But the printed part looks a bit warped, so I guess it has no enclosure.

     

    Ultimaker has never offered an enclosure (except in the new Advance Printing Kit thing), so yeah, this one probably doesn't have one either.

    And warping? I can't really see it. Maybe it's just a filleted edge or a very very slight warp, but I mean, Ultimaker made this for advertising purposes, so they probably didn't use an imperfect model.

    Edited by Guest
  • Link to post
    Share on other sites

    Posted · ULTIMAKER 3 (DUAL EXTRUSION?)

    Well....we can always ask Santa...

  • Link to post
    Share on other sites

    Posted · ULTIMAKER 3 (DUAL EXTRUSION?)

    I would say it sounds exactly like Zortrax Inventure printer, which is so expensive it is beyond amateur budgets. The word 'industry' appears on both Ultimaker and Zortrax when talking about this printer.

    Would bet not less than 4K Euros.

  • Link to post
    Share on other sites

    Posted · ULTIMAKER 3 (DUAL EXTRUSION?)

    I would say it sounds exactly like Zortrax Inventure printer, which is so expensive it is beyond amateur budgets. The word 'industry' appears on both Ultimaker and Zortrax when talking about this printer.

    Would bet not less than 4K Euros.

     

    Yeah, I kinda wish Ultimaker would come out w/ a budget printer or something that's newer than the UMO and UMO+ but still within 1k.

  • Link to post
    Share on other sites

    Posted · ULTIMAKER 3 (DUAL EXTRUSION?)

    Also, if you look at the 5 Years of Ultimaker page, you can see that the UM3 has much thinner edges for the panels. I wonder if that means they've gotten a sturdier material for the frame.

  • Link to post
    Share on other sites

    Posted · ULTIMAKER 3 (DUAL EXTRUSION?)

    Damn... my whishlist for Santa is full of... stuff for my wife... DAMN...

    Think I have to remove her...... presents - of course... :-)

    Maybe next time they release something "whow" and "wana have", Ultimaker team could issue some hints at around eastern so we could start saving money early enough... ;-)

    I´m so curious...

    • Like 1
    Link to post
    Share on other sites

    Posted · ULTIMAKER 3 (DUAL EXTRUSION?)

     

    I would say it sounds exactly like Zortrax Inventure printer, which is so expensive it is beyond amateur budgets. The word 'industry' appears on both Ultimaker and Zortrax when talking about this printer.

    Would bet not less than 4K Euros.

     

    Yeah, I kinda wish Ultimaker would come out w/ a budget printer or something that's newer than the UMO and UMO+ but still within 1k.

     

    I'm an UMO+ fanboy, and I wish Ultimaker considered an UMO++, but I guess that would be just an UMO+ with the (UM2+) upgrade kit (which @neotko has already done with very cool results).

    For now I'd like to see cool new features, and if possible, I would like even more if those new features were adapted to the UMO(+) by the community! I'm 100% in if someone wants to hack some Ultimakers. :D

  • Link to post
    Share on other sites

    Posted · ULTIMAKER 3 (DUAL EXTRUSION?)

     

    According to the teaser, it clearly has dual extrusion. But the printed part looks a bit warped, so I guess it has no enclosure.

     

    Ultimaker has never offered an enclosure (except in the new Advance Printing Kit thing), so yeah, this one probably doesn't have one either.

     

    luckily Ultimakers have always been square boxes, so making an enclosure is super easy....

    https://www.youmagine.com/designs/ultimaker2-top-cover-clips

  • Link to post
    Share on other sites

    Posted · ULTIMAKER 3 (DUAL EXTRUSION?)

     

     

    I would say it sounds exactly like Zortrax Inventure printer, which is so expensive it is beyond amateur budgets. The word 'industry' appears on both Ultimaker and Zortrax when talking about this printer.

    Would bet not less than 4K Euros.

     

    Yeah, I kinda wish Ultimaker would come out w/ a budget printer or something that's newer than the UMO and UMO+ but still within 1k.

     

    I'm an UMO+ fanboy, and I wish Ultimaker considered an UMO++, but I guess that would be just an UMO+ with the (UM2+) upgrade kit (which @neotko has already done with very cool results).

    For now I'd like to see cool new features, and if possible, I would like even more if those new features were adapted to the UMO(+) by the community! I'm 100% in if someone wants to hack some Ultimakers. :D

     

    True, a UMO+ style kit version of the UM2 or UM3 would be nice.......

    And yeah, Ultimaker hacking is awesome (that's kinda why I bought the UMO+ in the first place), but my big issue with it is that you usually end up buying more parts and spending extra money on something that wasn't exactly cheap in the first place.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...