SandervG

Bedankt voor de tip. Weet je nog welke support engineer het was? Dan zal ik het eens navragen. Bedankt,

Ha Korneel, Er zijn en aantal onderdelen niet op voorraad, vandaar dat dit ook als dusdanig op de website staat. Om zaken enigszins overzichtelijk te houden wordt het lastig om (halve) orders mee naar de ulti-evening te nemen maar de betreffende nozzles die we uit gaan boren moeten er dan wel weer zijn. Wanneer we de onderdelen weer op voorraad hebben zodat we kunnen zenden worden ze binnen 1 dag geleverd hier in Nederland, dus daar zit gelukkig vrijwel geen vertraging in. Een bowden tube moet geen probleem zijn, die moet hier nog wel ergens een liggen. Maar je hebt toch alleen een stukje PLA nodig voor de Atomic Pull? Of heb je je eigen methode bedacht? (PS..Ik reageer zo op je email).

what the f... how could this happen?

Did I miss something too? .. what is this about? :-|

It is definitely exciting when you see a big player like hp entering this/a market. Curious to see what will happen!

Have you seen the video that supports the Sprout and the artist stories? It looks cool, but I don't really see the contributing factor to 3D modeling / scanning. All is 2D and I haven't seen any 3D modeling in the videos. It also looks like it scans from the same location as the beamer.. wouldn't ambient light be a big factor in the resolution? For the machine, sounds promising! (unfortunately, for example kickstarter is fool of promising projects.. so I am curious to see what eventually will come of it). (of course.. hp is different from kickstarter. But still..)

b-e-a-utifull! I need to get me some of that copperfill!

Hi Taras, Thank you for your posts. In this case (and in almost every other case) it is extremely helpful if you can upload some pictures. We, as experienced users, may see something which you don't recognize as a sign or perhaps the other way around. Have you checked if the black reel is PLA or ABS? It is not necessary to do an Atomic Method every time a print fails, that is only necessary when your extrusion stops and the problem lies not with the feeder, i.e. even by pushing filament through manually nothing extrudes. Good luck printing!

Hi Bob, If you want to sell your Ultimaker please feel free. But I just want to mention that it is possible to print with PLA Flex. As example, the entire http://www.xyzworkshop.com/inbloom/ is printed in PLA Flex. Have a great day.

Ha Dutchies! De volgende Ulti-evening editie komt er weer aan! Omdat we merken dat het interactieve segment goed wordt ontvangen willen we dit er graag inhouden. Daarom zullen we de volgende editie nozzles gaan uitboren. We zullen boortjes meenemen variërend van 0.5mm tot 1.2mm, en het is aan de gebruiker om aan te geven welke grootte deze wil. Wij zullen de nozzle's meenemen. Met een grotere nozzle kun je sneller printen omdat de lagen dikker zullen zijn en je kan meer extruderen. Een grotere nozzle wordt voornamelijk gebruikt voor grote prints. Het zou fijn zijn als je hieronder een comment kan achterlaten als je komt, en of je met een Ultimaker Original of een Ultimaker 2 komt. Dan weten wij ongeveer wat we mee moeten nemen. Wat meer praktische informatie over de avond: Datum: 17-11-2014 Tijd: 17.00 - 22.00 Locatie: ProtoSpace, Utrecht 17.00 - 18.00 Aankomst, en bestel wat eten als je honger hebt. (kosten: €10) 18.00 - 18.30 Korte introductie 18.30 - 19.00 Eten 19.00 - 22.00 Boren & Printing time! Hopelijk zie ik jullie allemaal daar!

Hi Everyone, Soon it is time again for the next Ulti-evening. We want to keep the interactive part as the core of the ulti-evening. In that regard we will do a demo and as a group drill out nozzles ranging from 0.5 to 1.2mm It is up to the user to decide what size they want, and we will supply the nozzles. With a bigger nozzle you can print faster, because your layers will be thicker and you can extrude more. Mainly used for big prints. Please leave a comment in the bottom if you want to join and if you have an Ultimaker Original or Ultimaker 2. Some more practical information about upcoming Ulti-evening: Date: 17-11-2014 Time: 17.00 - 22.00 Location: ProtoSpace, Utrecht 17.00 - 18.00 Arrival (bring your Ultimaker) and order food if you are hungry. 18.00 - 18.30 Short introduction. 18.30 - 19.00 Food 19.00 - 22.00 Drilling & Printing time! Looking forward seeing you there!

This is the video documentation of the Ulti evening August edition.

Oh my. Has it finally happened? :mrgreen: I want to second Robert. Bluebot has taught me a lot about 3D printing! Welcome to the forums, I hope you will have a great time. But I trust you will, it is the best community to be part of.

Can't argue with that!

Wow, super cool! I am gonna reach out to them. Thanks Titus!

Hi Nico, Sorry we didn't get to see you! Hopefully next time! @UltiArjan, lol! I would like to think we had a better time then what is written on some of the faces I see!

ahh dat is jammer!

I think your pictures are labeled as private.. can you make them public so we can see them?

I am not from Utrecht so I wouldn't know.. I could use google but my guess would be as good as yours. I will ask some people in the office, there are some from Utrecht.

I believe there will be Harma, myself, Nallath (who can introduce himself with his real name in Utrecht (cliffhanger), a bunch of other people from R&D who spent less time on the forums and I think 1 or 2 from technical support. So.. quite a few

Hi Nico, it would be great if you could join us, really! It will be at http://www.cafe-olivier.be/content/locaties/utrecht (which is I heard a Belgium Cafe, Didier? ) The address: Achter Clarenburg 6a and it was pretty close to Utrecht Centraal We arrive there around 4pm for a beer tasting. You (and I mean everyone in this thread) are more then welcome to join in or just get a normal beer and come and meet us!

Er is een tijd en een plaats bekend. http://www.cafe-olivier.be/content/locaties/utrecht Wij zullen rond 4u binnen lopen voor een bierproeverij. Je kan aansluiten, je kan ook gewoon een normaal biertje komen drinken!

Als je goed je best doet misschien de volgende keer

another thing I noticed on the picture is that it looks like the teflon part is pretty high up from the hot end isolator (ring with holes). Shouldn't that be like 1mm or so? At what temperature are these tests done? On October you say 230º, but perhaps that changed since receiving the new teflon. Is your feeder also ticking? If your feeder is pushing in filament, can you manually stop it from feeding by holding it between 2 fingers? Thank you