Nicko_Airbus

Same Issue here Vasile. It's not a problem that happens at every layer. it just happends at the end of the print when finalizing the print. I don't understand the issue. It's like if the bed is moved up after the print finishes and then the print head want's to move to the side and then CRASH. I would love to have some help from Ultimaker team on that matter !

I would love an update on this from Ultimaker Team ! Same thing happened to me with a 100 mm tall print

In cura, can you just enable the option Z hop when retracted or mayble play with the combing mode... Hope this helps. Not expert advice lol

Update : Even the print core calibration process (ladder print x and Y offset) won't work. Startiing the print with a USB key doesn't work either.

NEED HELP. I start a print with the digital Factory, my printer receives it, it goes to the right to change to the core #1 and then the print fails instantly and it asks me if I want to retry the print. It does this every time, so I can't print anything 😢 I've tried different prints, switched cores, unplugged the air manager (because I had a fan issue recently and had to change the fan), restarted the printer several times, reinstalled the latest firmware, returned to factory settings, realigned nozzle switch, etc. Anyone has an idea of what I should do next ? Link to video :https://photos.app.goo.gl/rPvtYYBCGgBGmbMs7 @gr5 @SandervG my heroes please help !

This here will help you :

@geert_2 and @SandervG thanks a lot for your comments, I will try to modify these settings in cura.

Did you find the problem ? Maybe changing the setting (print outer before inner walls) ? Maybe also print speed ?

Did you find the problem ? I'm not an expert, but sometimes that type of problem is caused by loose pulleys. Have you tried to scale down a little bit to see if it happens again ?

Anyone ?

I'm having small shifted layers along my straight walls and I don't understand why... I Printed multiple parts on a same print, a cylindric part is almost perfect, but the straight walls definitively have a problem, can anyone help me ? Look at the pictures. I printed with Ultimaker PLA at 0.15mm layer hieght with 0.4 AA at 30mm/s

Hey gr5! I unplugged the machine for 5-10 minutes like you said and it worked ! The Printer is now running normaly. Why 5 to 10 minutes worked and not a couple seconds ? What's the difference ?

Thank you ! I'm in Canada. My reseller is Shop 3D.ca

Hello, I upgraded my S5 Pro Bundle to 6.5.0 and since then my printer is in sleep mode. I can't do anything with the screen since it's only showing "Ultimaker S5". I tried pluging and unpluging but nothing works. PLEASE HELP.

I don't know if it happens in the material station or in the bowden tube. I see the logo, not the robot

I'll make this Topic revive since I had the same kind of issue recently. Printed a part in Toug PLA and supported by Natural PVA. 220C, 60 mm/s, 0.3mm layers, prime tower, 60C build plate and every other settings kept as recommended by cura. My print is fine, no shifted layers... But when I went to remove the build plate, I noticed that it had shifted 7mm to the right. https://photos.app.goo.gl/ptpYenkQLcyUhwPx8 (photos) I tried to push it back into place and it took me lot of force to do so. I really hope I didn't damage anything (i have the S5 pro bundle) Any ideas of what could have happened ? Cheers.

Since the first time I received it (in a box and sealed bag (I think)) I put it in the material station. Every now and then, the filament brakes in the bodwen tube, sometimes It doesn't stick to the other layers and and some stringing. I just had the same problem with my ultimaker natural PVA. Printing .3mm high layers at 35 mm/s at 220C. Other settings are as suggested by cura...

I had an issue today while printing a tough PLA + PVA part. At layer 147 of 167, between a layer of PVA and PLA, they were bumps on my print, a sort of mushy finish. (see pictures and video) Any ideas why ? 35 mm/s, 0.3mm layer height, 50% infill PLA, 20% infill PVA. Photos (12).zip

Did you get better results ? I have the same issues with Aquasys and my printer (ultimaker S5 Pro Bundle). I wonder what we should change to get better prints. Any Feedback ? @willryan3 @SandervG

I have the same equipment you have and the same issue occured... Don't know why. I fill like the solution given by Dim3nsioneer should help! Good luck! Give us some news about your results!

Hello, Let's say I have a basic cube i want to print. What would be the difference if I rotate the bloc by 45 degrees to always use x and y axis while printing VS Printing along x and y seperately. Will the resulting part be more precise since I used both axis all the time ? or not ? Hope it's clear, Thank you.

Thanks a lot ! Really helps

This is awesome work ! thanks a lot for the feedback !

I used aquasys 120 and it dissolves pretty well even at 40 C. I made a part from PLA and the structure was Aquasys and verything was fine.

Hey guys I'm printing with the S5 pro bundle with PLA from color fabb and It is just impossible to print nice text on my parts... I've done like 8 different tests and nothing really helps. Attached is an excel file with my settings and in the excel is also a photo of the results. Here is the part that I'm trying to print (Attached) Will I be more successfull with low speed (30), thin layers (0.1), cold temp (190), cold bed(30) ? And don't know what to do anymore.... GT9910985-GTOO01 1.stl