27 minutes ago, tinkergnome said:
OK, but there are different hex-files with this version number and the symptoms are exactly the same as if the variant without 'expansion-board' in the name is installed.
That's why this question came to my mind...
My recommendation is to double-check that "Tinker-Mark2-expansion-board-19.03.1.hex" is used
(or "Tinker-Mark2-extended-expansion-board-19.03.1.hex" if you use an UM2 extended+)
OK thanks! I will download "Tinker-Mark2-extended-expansion-board-19.03.1.hex" and install it just to be sure that is the one that is in the machine.
How exactly do I do that again? I don't see a way it will let me "copy" or download" that particular file from Github. (I don't remember how I did it before. It's been too long. And looking online it simply sais to click on "Raw" and then right click and "save as" but I do not get this option when I do that. Only to "save page as" and that obviously isn't what I want.)
Recommended Posts
Top Posters In This Topic
90
81
72
66
Popular Days
May 5
30
Mar 24
25
May 4
23
May 6
22
Top Posters In This Topic
RudydG 90 posts
foehnsturm 81 posts
tinkergnome 72 posts
ultiarjan 66 posts
Popular Days
May 5 2017
30 posts
Mar 24 2020
25 posts
May 4 2017
23 posts
May 6 2017
22 posts
Popular Posts
rigs
@zerspaner_gerd & @MarcoUbtz Thank you gentlemen, everything is working perfectly now https://www.youmagine.com/designs/flexible-coupler-using-colorfabb-ngen-flex
zerspaner_gerd
Already found?? Here are my noted links: https://forum.simplify3d.com/viewtopic.php?f=8&t=1959
morfeushav
I am creating too a holder for mount the clamping dock on a ultimaker 2 aluminum clone. I haven´t have yet the final part., and I have to test it. This is how looks
Posted Images
tinkergnome 927
OK, but there are different hex-files with this version number and the symptoms are exactly the same as if the variant without 'expansion-board' in the name is installed.
That's why this question came to my mind...
My recommendation is to double-check that "Tinker-Mark2-expansion-board-19.03.1.hex" is used
(or "Tinker-Mark2-extended-expansion-board-19.03.1.hex" if you use an UM2 extended+)
Link to post
Share on other sites