Post your latest print!

[Labern 774]

Mini Ultibot scaled down 0.625

Printed with 0.25mm Nozzle and 0.04 Layers

 

[electronic_matt 0]

Mini Ultibot scaled down 0.625

Printed with 0.25mm Nozzle and 0.04 Layers

 

How did you change the nozzle?

 

[ultiarjan 1,223]

here you'll find how to order the changeable nozzle block for UM2;

http://umforum.ultimaker.com/index.php?/topic/7689-custom-heater-block-to-fit-e3d-nozzle-on-ultimaker-2/

 

[Titus 170]

Still have to find a cheap tumbler or make one to polish these beauties!

This really is an amazing model, the ease with which you can print this is amazing!

 

[Dim3nsioneer 557]

I kind of like that matte finish... why polishing? It looks much more natural that way! Is it full size or half?

 

[Titus 170]

This one is about 10 cm high(only had 1 hour to print). But I like it like this too, just want to know what it can become if you actually polish it

 

[gr5 2,192]

STRETCHLETS!

Making 500 stretchlets for a big event coming up in 2 weeks.

 

[pm_dude 27]

Nice. Need a hand ?

 

[shurik 87]

The top-right stretchlet got a very natural furry-cute look. What filament did you use for it?

 

[titanoid 4]

Must be some super secret experimental stuff. But why did you print it with combing off?

[IRobertI 520]

Oh the irony of that comment

 

[Labern 774]

THE WORLDS SMALLEST 3D PRINTED CORDLESS DRILL

Well I'm sure if its the smallest but its still tiny and it actually works

Anyone Got a blocked nozzle :-P

All it cost me to make is a tiny bit of filament and a hearing aid battery

 

[DidierKlein 729]

Did you test it on your finger? :mrgreen:

Awesome stuff either way

 

[Labern 774]

Yeah I did. But not on purpose

[woofy 12]

The top-right stretchlet got a very natural furry-cute look. What filament did you use for it?

 

Oh my god!

I had to go and look again.

First time around, I saw the stretchlets and missed the woofy.

I need a holiday.

 

[Labern 774]

my Mini Drill next to a full sized drill

 

[titanoid 4]

Labern, you're crazy! This is so cool! Chance to get an instructable?

[skinny-kid 65]

Labern, that is remarkable!

 

[SandervG 1,521]

THE WORLDS SMALLEST 3D PRINTED CORDLESS DRILL

 

Well I'm sure if its the smallest but its still tiny and it actually works

Anyone Got a blocked nozzle :-P

 

 

All it cost me to make is a tiny bit of filament and a hearing aid battery

 

Do you have a video of it working??

It is not like I don't believe you it is just well.. you know. Video or it didn't happen?

 

[tsagos 8]

Really nice Labern!

 

[gr5 2,192]

First time around, I saw the stretchlets and missed the woofy.

 

I had to put a treat under all that to get him to go closer. He is such a nice dog he was afraid to disturb the stretchlets to get at his treat so I had to push a few stretchlets out of the way after I took the pic so he could get it.

 

[Nicolinux 288]

OMG Labern - WANT!

 

[Dim3nsioneer 557]

Did you actually check what the world record for the smallest working electric drill is? You might at least be close...

 

[frilex 0]

Tried my hand at some copperfill.

I was surprised how easy it was to print with default PLA settings at 40mm/s and 0.1mm height.

Only used some steelwool for the finish.

 

[ksn-arts 84]

Enjoy

https://www.youmagine.com/designs/rec-toy-gun

http://www.thingiverse.com/thing:725841

pint speed 120 mm sec / 200-250 micron/PLa