Dim3nsioneer 558
so i did the bearingcap mod on my new umo+ and really made a difference :mrgreen:
source of the design? self-made? :-P
so i did the bearingcap mod on my new umo+ and really made a difference :mrgreen:
source of the design? self-made? :-P
did a littllebit of remix and some of myself ,i used nylon rings in to my models.
if you like i can try to put the files online.
Here are gifts i did for Christmas'day : "Christmas barque (small boat)"
Ready on time thanks to forum users (Amedee & Didier Klein) & UM2.
Merry Christmas to everybody !
Ha Nice! Joyeux Noel!
This year I made a deck of card for a memory game for the kids with the picture of everyone in the family. 14 members X 2 and the box. Everyone is looking good and weird at the same time so it should be pretty funny to test the ego of everyone.
And a beatify vase for mom!
I stacked them in a single image, cleaned them (masks, grayscale, removed shadow and highlights, added some volume) and did some displacement in 3dsMax inside the modeled picture frames. The top of the frame doesn't come out well. I'll have to fix that.
I have 3 sets to print and it takes ~18 hours each. But today I'll give just one...
he knows kung fu! commands electricity! his powerful and huge fists to punish all enemies! and kick his leg takes you around the world! Meet Thunder / Merry Christmas
Great work again Sergey!
Great work again Sergey!
Thanks
I guess I'll have to jump in after that to lower the average a bit
Just a few simple cover thingies to make the bolts less prone to stabbing someone.
Someone (sockles) went through the trouble of making a wooden holder for the ratchet wrench.
Not bad but I think the wood is worth way more than the wrench
How strong is that ranch Cleven?
I haven't done a torque test, but I was able to put the same amount of force as a similar sized wrench.
I would need to test to destruction to know for sure how many NM / FTlbs, but again that comes to how well it is printed
I am in New Brunswick right now, when I get back to Houston, if I find the time I can try to break one
How strong is that ranch Cleven?
This: printed this on the Kossel, it's 28.5 cm high, printed in XT. @255, 0.6 nozzle, 0.2 layer height, spiralize. It's water tight.
https://youmagine.com/designs/vase-xxl-updated
I see you still need to mount some led strips in the kossel
Printed an emergency house key to carry in my wallet.
yes.. it works
Printed an emergency house key to carry in my wallet.
yes.. it works
from the 3D printing point of view something to be happy about ...
from the safety (of the lock) point of view rather something to worry about ...
Yes, considering all I had to do was a quick scan and literally 30 minutes later had a working key.
I presume I could use the same technique with most standard keys.
I wanted to print a handle for my umo + but couldn't find one with the Original company logo so i made one :grin:
if someone like to download it its on: (http://www.thingiverse.com/thing:615987)
Yes, considering all I had to do was a quick scan and literally 30 minutes later had a working key.
I presume I could use the same technique with most standard keys.
Yes I did mine from a picture and a Caliper. 30 minutes top
Did some cookie cutters this week.
All the letters:
https://www.youmagine.com/designs/cookie-cutter-letters
and a Christmas tree:
https://www.youmagine.com/designs/cookie-cutter-christmas-tree
Nice fridge enhancement for the stacked yoghurts.
Now they no longer fall down when I open the door of the fridge
Printed an emergency house key to carry in my wallet.
yes.. it works
Weren't you worried it might break in the lock?
Recommended Posts
Top Posters In This Topic
362
282
221
179
Popular Days
Jan 5
30
May 12
26
Jan 13
23
May 1
22
Top Posters In This Topic
ian 362 posts
cloakfiend 282 posts
skint 221 posts
SandervG 179 posts
Popular Days
Jan 5 2014
30 posts
May 12 2014
26 posts
Jan 13 2014
23 posts
May 1 2014
22 posts
Popular Posts
kmanstudios
Took me forever to do this. And it is still rougher than I would have liked. 3D concept rendering: Finished piece:
kmanstudios
I just finished this. It was a multi-part print for ease of painting. Some of it I am not sure what happened...but hey, it is purty....And, I am unanimous in that ? Test Render Parts
gr5
Bath interferometers. I have made about 20 of these for people who use them to test their telescope mirrors. They are amazingly accurate and can do better than a $40,000 Zygo PSI optical tester. Th
Posted Images
gizmo999 11
so i did the bearingcap mod on my new umo+ and really made a difference :mrgreen:
Link to post
Share on other sites