3D Prints
1,105 files
-
Life sized Crow skull
By gareee
Ulimaker 2+ extended
Matterhackers 5lb natural pla
printed at 200 degrees
1,274 downloads
0 comments
Submitted
-
T-Rex Skull Shower Head
By brentwerder
Saw this floating around Thingiverse and decided to give it a try, and I was not disappointed. This has to be one of my favorite prints - it's so funny, and yet so simple. The black PLA/PHA ColorFabb I used makes this look awesome. Really cool print! And, it actually WORKED! It held water! And it DIDN'T melt, even when I cranked the shower heat all the way up! I would definitely reccomend giving this a try - you won't regret it!
1,990 downloads
0 comments
Updated
-
Test boat copper plate test.
By cloakfiend
A print that i had lying around i thought id test coating on.... acetoned before coating.
1,964 downloads
0 comments
Updated
-
PANDORO TEALIGHT CANDLE HOLDER
By CREA
Xmas Tealight candle holder inspired on the traditional Italian Christmas sweet (Pandoro).
2,064 downloads
0 comments
Updated
-
0 comments
Updated
-
Tapir Fan Shroud
By LePaul
The Tapir fan shroud was suggested (on YouMagine) as a means to resolve overhang issues on the UMO. Since there is only one cooling fan, overhangs are happening on the non-fan side.
1,778 downloads
0 comments
Submitted
-
0 comments
Submitted
-
0 comments
Updated
-
Laberns shroud in copper for UM2
By cloakfiend
just a test to see if the plate is enough to stop any warping, my early tests showed it should work, but im not sure if the fact its copper and conducts heat well will be an issue that effects the print? might be better might be worse, its very light so that is a plus!
the coat is not ideal and imperfect due to its size, but as an experiment......ill allow it.
1,835 downloads
0 comments
Updated
-
In-N-Out Scale Model
By brentwerder
Oh man. This was an awesome project! I designed this thing in SolidWorks 2015 and printed it out on my Ultimaker Original +. There are more details about how and why I made it on the Thingiverse page for it under my username UsernamePassword. Go check it out, and print one for yourself!
1,347 downloads
0 comments
Updated
-
egg holder
By neone
An old egg holder design that I converted towards a 3D print model.
1,276 downloads
0 comments
Updated
-
temperature fillament test by UltiArjan
By SandervG
This test model lets you compare the performance of filaments on your printer with difficult areas like overhangs, bridging, etcetera over a temperature range. In this timelapse you can see Ultimaker PLA Silver Metallic tested from 210˚ to 190˚ C on an Ultimaker 2+ 3D printer.
Curious to find that sweetspot on how to best print overhangs or bridges? Give this stress test a go!
Thank you @UltiArjan!
2,704 downloads
0 comments
Updated
-
I love the design, printed it with the same settings as garycmartin! great job
By domustyle
I love the design, printed it with the same settings as garycmartin! great job
1,941 downloads
0 comments
Updated
-
Piggy money box
By viralata
This is a remix of my good old ceramic piggy bank. As my second son wanted one too, I scanned the original (using a Ciclop 3D scanner), then modified it in Blender (mostly using a decimate modifier and the Tissue addon).
It must be printed with supports, so the bottom part need some work to be nice, but you barely see it.
I printed it at 0.2mm layer height, for time reason of course, but should be nicer at 0.1mm height.
1,774 downloads
0 comments
Updated
-
PLActron vase delta - #04
By uit
printed on Ultimaker2-A39sliced with Cura 15.02.1 (UltiGCode)optimized with Curator 0.1.0.1model: https://www.youmagine.com/designs/plactron-vase-delta------------------------------------------------------------988 Layers0,2mm Layer Height0,8mm Wall Thickness0,8mm Bottom/Top Thickness0,2mm Initial Layer Thickness----------------------------------------0% Infill0 Retractions0 Layers with Support----------------------------------------30mm/s Print Speed80mm/s Travel Speed20mm/s Bottom Layer Speed30mm/s Infill Speed----------------------------------------Filament: Innofil3D PLA color (2.85mm)----------------------------------------235°C Temperature66°C Bed Temperature7,00 Meters printed
2,520 downloads
0 comments
Updated
-
0 comments
Submitted
-
"The Visitor" aka Little John
This is 3D model we made, based on the statue "The Visitor".
More info about the statue : http://gardeco.eu/collections/the-visitor/
I sliced the model with Simplify3D so I could use the double-process feature. The bottom 3 centimeters have an infill of 60% and the rest is 15%. This makes the statue much more stable on my desk.
Printed with Colorfabb standard White on my UM2+ extended.
I'll be printing a whole collection of these little johns very soon.
1,353 downloads
0 comments
Updated
-
0 comments
Updated
-
Human study
By neone
A human study that became so thin that a simple line can represent a human form.
http://timguldentopsbe.webhosting.be/?portfolio=human-study
1,146 downloads
0 comments
Updated
-
Small planter with procedural texture
By viralata
This a pot for flower I designed in Blender. I needed a small and stylish pot. Hope you enjoy it.
I printed it at 0.2mm height. You can vary the size of the pot according to your needs.
There is a hole so that the water doesn't stay at the bottom of the planter.
1,436 downloads
0 comments
Updated
-
0 comments
Updated
-
0 comments
Submitted
-
0 comments
Updated
-
0 comments
Updated
-
H0 Turntable
By zoev89
Here is my printed turntable project. See YouMagine for the details. It combines 3D printer, painting, electronics and mechanics.
1,936 downloads
0 comments
Updated