foehnsturm 970
"And now for something completely different."
What tip for the Merlin are you using there?
Also, I have found that the Merlin tip is very sensitive to crossflow fan airflow during the first millimeter of the print. Have you noticed this and if so, what work around have you used.
The tip is my own design. A workshop made me a batch with 0.2, 0.4, 0.6 and 0.8 mm (which can be drilled to 1.0 mm). If you like to try they are 4 € / piece.
I didn't notice the sensitiveness so far. But it makes some sense as the heated mass of the nozzle is so low. However, I always tried to extend the heating block isolation thing some mm downwards to reduce the airflow hitting the nozzle.
Recommended Posts
Top Posters In This Topic
280
228
170
133
Popular Days
Jul 14
22
Mar 26
19
Feb 13
18
Sep 23
17
Top Posters In This Topic
foehnsturm 280 posts
neotko 228 posts
ultiarjan 170 posts
macua85 133 posts
Popular Days
Jul 14 2015
22 posts
Mar 26 2015
19 posts
Feb 13 2015
18 posts
Sep 23 2015
17 posts
Posted Images
Dim3nsioneer 558
Have you tried http://marlinbuilder.robotfuzz.com/?
Link to post
Share on other sites