medicalmodeller

Printing with Formfutura's Flexifil on UM3. Print fails after several hours

By medicalmodeller, February 15 in UltiMaker 3D printers

Does the Ultimaker 3 have a thermal cut off switch/fuse if it overheats?

By medicalmodeller, July 29, 2023 in UltiMaker 3D printers

Loading ASA onto my Ultimaker 3

By medicalmodeller, December 3, 2021 in UltiMaker 3D printers

• UM3 (E)

UM3 Initial layer has bare areas and rough areas

By medicalmodeller, November 30, 2021 in Improve your 3D prints

Packaging for Ultimaker 2 Go

By medicalmodeller, August 24, 2020 in Buying or selling your UltiMaker

Unable to change material settings for Ultimaker2Go

By medicalmodeller, August 19, 2020 in UltiMaker Cura

Problems loading both Cura 3.6 and beta 4.0

By medicalmodeller, February 7, 2019 in UltiMaker Cura

Cannot load Cura 3.6

By medicalmodeller, November 28, 2018 in UltiMaker Cura

ER26 File not compatible with your printer

By medicalmodeller, June 2, 2018 in UltiMaker 3D printers

Setting parameters for new material

By medicalmodeller, April 11, 2018 in UltiMaker Cura

Why is retraction distance set to 6.5mm in Cura 2.3.1

By medicalmodeller, November 30, 2016 in UltiMaker Cura

Can I make Cura force the Ultimaker 3 to print everything with single filament on Ultimaker 3?

By medicalmodeller, November 30, 2016 in UltiMaker Cura

Pause at height plug in does not pause

By medicalmodeller, January 22, 2016 in UltiMaker Cura

How should I adjust the retraction setting

By medicalmodeller, February 16, 2015 in UltiMaker Cura

Software to "cut away" unwanted parts of modelled bone

By medicalmodeller, June 14, 2014 in UltiMaker Cura

PLA stops coming out 1/2 way through the print of a fractured bone

By medicalmodeller, February 10, 2015 in UltiMaker 3D printers

Findings model errors

By medicalmodeller, December 3, 2014 in UltiMaker Cura

Print failure possibly because the bed not hot enough

By medicalmodeller, December 3, 2014 in UltiMaker 3D printers

Printing tiny gears - resolution not good enough

By medicalmodeller, November 14, 2014 in UltiMaker 3D printers

Printing stops due to blockage after 2 hours out of 7

By medicalmodeller, October 27, 2014 in UltiMaker 3D printers

How do I stop parts being filled in that should be open?

By medicalmodeller, November 2, 2014 in Improve your 3D prints

Cura cannot cope with big file?

By medicalmodeller, October 25, 2014 in UltiMaker Cura

Possibly blocked nozzle and now wires in the way of Bowden tube

By medicalmodeller, August 25, 2014 in UltiMaker 3D printers

Only printed 25% of the model - why???

By medicalmodeller, July 17, 2014 in UltiMaker 3D printers