Jump to content

Ultimaker 4, The next generation of 3d printer


Troki

Recommended Posts

Posted · Ultimaker 4, The next generation of 3d printer

Hey guys, it has been a while since the release of Ultimaker 3 what do you think can we expect a new 3d Printer in the upcoming weeks or months maybe an Ultimaker 4 ?

  • Link to post
    Share on other sites

    Posted · Ultimaker 4, The next generation of 3d printer

    Perhaps it should use quality components instead of poor cinese's ones and be assembled by technician instead that by monkeys?

    That's would be a GREAT improvements !!

    • Like 2
    Link to post
    Share on other sites

    Posted · Ultimaker 4, The next generation of 3d printer

    Perhaps it should use quality components instead of poor cinese's ones and be assembled by technician instead that by monkeys?

    That's would be a GREAT improvements !!

    You are entitled to your opinion but please keep our house rules in mind when interacting on our forum. Looking at the tone of this and your previous posts I feel this needs to be said. Thank you for understanding.
  • Link to post
    Share on other sites

    Posted · Ultimaker 4, The next generation of 3d printer

    I heard a rumor it's really good at toasting bread and you can schedule it to be ready for breakfast in the morning.

    The cores can spread whatever topping you want.

    • Like 2
    Link to post
    Share on other sites

    Posted · Ultimaker 4, The next generation of 3d printer

    Perhaps it should use quality components instead of poor cinese's ones and be assembled by technician instead that by monkeys?

    That's would be a GREAT improvements !!

     

    dude, stop being a dick.

    you're only posting flamebait and you're being a troll.

    the UM uses Misumi components which are japanese and not "poor cinese"

    I'm sure that every now and then there are mistakes made when assembling the printers. that happens in every company.

    what is the point you are trying to make and can you base it on an actual fact?

    and actual fact is that UM scores very high with their printers in their userbase according to the yearly 3D Hubs survey..

    • Like 1
    Link to post
    Share on other sites

    Posted · Ultimaker 4, The next generation of 3d printer

    Get rid of arduino please. UM4 needs 32 bit motion planner. Keep the dual computers though -that part I hope continues into the UM4 design.

    • Like 1
    Link to post
    Share on other sites

    Posted · Ultimaker 4, The next generation of 3d printer

    To be able to print cookies!?

    • Like 3
    Link to post
    Share on other sites

    Posted · Ultimaker 4, The next generation of 3d printer

    I heard a rumor it's really good at toasting bread and you can schedule it to be ready for breakfast in the morning.

    The cores can spread whatever topping you want.

    Except the new BB-Q core - that one is only for summer dishes served outside.

    • Like 4
    Link to post
    Share on other sites

    Posted · Ultimaker 4, The next generation of 3d printer

    To be able to print cookies!?

    that's already work - place some pancake dought at the build plate and give it some heat... :-)

  • Link to post
    Share on other sites

    Posted (edited) · Ultimaker 4, The next generation of 3d printer

    To be able to print cookies!?

    that's already work - place some pancake dought at the build plate and give it some heat... :-)

    That's baking cookies... I'm talking

    :p

    So first layers of dough, then layers of niceness and finally some icing

    Edited by Guest
  • Link to post
    Share on other sites

    Posted · Ultimaker 4, The next generation of 3d printer

    To be able to print cookies!?

    that's already work - place some pancake dought at the build plate and give it some heat... :-)

    That's baking cookies... I'm talking

    :p

    So first layers of dough, then layers of niceness and finally some icing.

    With all the cookie hungry people here at the office, I think we need a few of those printing 24/7 ;)

    • Like 1
    Link to post
    Share on other sites

    Posted · Ultimaker 4, The next generation of 3d printer

    a faster and bigger volume option;

    direct drive or bondtech feeder;

    enclosured;

    open-source since the beggining;

    no micro stepping;

    lasers and sensors everywhere...

    8)

    • Like 1
    Link to post
    Share on other sites

    Posted · Ultimaker 4, The next generation of 3d printer

    I really hope,

    a joint-venture between Ultimaker and Olson

    for an AA ruby core.

  • Link to post
    Share on other sites

    Posted · Ultimaker 4, The next generation of 3d printer

    I really hope,

    a joint-venture between Ultimaker and Olson

    for an AA ruby core.

     

    3dsolex.com has ruby cores.

  • Link to post
    Share on other sites

    Posted · Ultimaker 4, The next generation of 3d printer

    no micro stepping;

     

    What? No microstepping?

    If you take away the 16X microstepping and want the same positional accuracy you would have to add a 16X gearbox. Also I'm not sure if the steppers can run 16X faster - they would need to handle 40,000 steps per second to hit 300mm/sec.

  • Link to post
    Share on other sites

    Posted · Ultimaker 4, The next generation of 3d printer

    I know this is only a wish list....but please make something that can print large :)

    Could care less about dual extruders (make it an option?)

    The Olsson block and ability to use many filament types with no hassle....like the UM2+.... :)

  • Link to post
    Share on other sites

    Posted · Ultimaker 4, The next generation of 3d printer

    please make something that can print large :) 

     

    But could you afford it :p

  • Link to post
    Share on other sites

    Posted · Ultimaker 4, The next generation of 3d printer

    But could you afford it :p

     

    The challenge is on them to put something on the market at a good price point :)

    • Like 1
    Link to post
    Share on other sites

    Posted (edited) · Ultimaker 4, The next generation of 3d printer

    a closed chamber thermally regulated, with closed compartments for filaments like pva....

    This, plus:

    - Filament that is easily accessible - accessing from the back is a joke

    - Firmware that doesn't glitch 24/7

    - Cura that actually works quickly and reliably

    I bought an UM3 for its reputation for reliability and quality - I mistakenly thought it would be 'print and go' - I've had nothing but problems. At the moment I can't even send a Simplify 3D print via Cura to the printer (using Simplify 3D because Cura is awful). The supported underside of prints are a complete mess, stringy and not flat. I should be able to just print it out of the box perfectly and only mess with settings if I want to - not have to change things because they don't work in the first place!

    Edited by Guest
    • Like 2
    Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...