We have big news...

[SandervG 1,521]

"Continuous, hassle-free 3D printing, like never before! "

 

As you may have seen a new image appeared on our homepage this morning, exciting news! On September 24th we'll announce what big news we have been working on for you. Keep an eye our for more updates and feel free to speculate below! 

 

 

[Wilds 0]

Awesome, can't wait!

 

*Speculation mode ON*

Seems like a new FDM and Resin printer?

Edited September 10, 2019 by Wilds

[Brulti 177]

Ultimaker 42, the answer to everything! 😋

[Wilds 0]

I'm hoping for a modern um2+ with enclosure! 

[Cymon 5]

Looks interesting!

 

The first one looks like an ordinary UM S5, because of the presence of door hinges and two extrusion tubes. But in relation, the hinge and the touchscreen look bigger than on the S5, so I assume the whole thing is way smaller than the S5. Maybe it will be a UM S5mini or UM 3mini with doors?

 

Second one could be a SLA printer, but the key word is "continuous" and the touchscreen is located in the middle of the front so my guess is a printer which can either change the build plate itself or remove the print by itself to continue with the next print by himself.

This would be awesome!

[tinkergnome 927]

I don't know what you see...
It's obviously nothing more than an Ultimaker with "black chassis option"...

finally! 😛

[Smithy 1,146]

1 minute ago, tinkergnome said:

nothing more than an Ultimaker with "black chassis option"...

to follow the trend with dark themes and background 🙂 

[ahoeben 2,016]

Looks like we're finally getting that Ultimaker lawnmower.

[rebekah_harper 60]

I was think dual purpose hot plate; print bed and coffee heating system. 

Cause I needed a ton of it these past few weeks.

[kmanstudios 1,120]

18 minutes ago, ahoeben said:

Looks like we're finally getting that Ultimaker lawnmower.

😂

 

1 hour ago, Brulti said:

Ultimaker 42, the answer to everything! 😋

😂

 

 

[Dim3nsioneer 558]

26 minutes ago, ahoeben said:

Looks like we're finally getting that Ultimaker lawnmower.

 

😒And I hoped it would be that long-promised toaster.

[shurik 87]

1 hour ago, Wilds said:

I'm hoping for a modern um2+ with enclosure! 

 

UM2+ Reloaded!

 

Would you believe I still use my 5.5 years-old UM2 and it is as good as ever?

If time comes to replace it, just another one of the same class would do.

[orionz06 0]

Good news, I saw this yesterday just as I registered my account here.  Bad news...  This is delaying my S5 purchase.  

[ahoeben 2,016]

You want to see what that lawnmower is all about before purchasing a 3d printer. Makes sense 😉

[DidierKlein 729]

32 minutes ago, shurik said:

 

UM2+ Reloaded!

 

Would you believe I still use my 5.5 years-old UM2 and it is as good as ever?

If time comes to replace it, just another one of the same class would do.

 

I still have my first UM2 that is still use often and works as it used to back then (in 2014 already)

[Cymon 5]

2 hours ago, tinkergnome said:

It's obviously nothing more than an Ultimaker with "black chassis option"...

As long as they also add the option to turn the LED frame lights from white to red or blue, I'm cool with it. 😄 

[tinkergnome 927]

There we have it! A ride-on lawnmower with RGB lights - makes sense! (and it don't even needs a lawn to look good)

And let's hope that there's an option to switch the lights off at night... this time... 😝

[Travis7s 26]

My guess is S5 with aluminum bed and glass frame.

[RetromanIE 41]

Ultimaker Classic / Classic +?

And the second some sort of resin, maybe with quick swap vat/bed or something along those lines. Really want Ultimaker to move away from the UM3 and S5 style nozzle and back to something more along the lines of the UM2+ olsson block(with some updates/improvements of course). I can dream i suppose.

[shurik 87]

1 hour ago, RetromanIE said:

Really want Ultimaker to move away from the UM3 and S5 style nozzle and back to something more along the lines of the UM2+ olsson block(with some updates/improvements of course).

+1.

[Wilds 0]

1 hour ago, RetromanIE said:

Ultimaker Classic / Classic +?

And the second some sort of resin, maybe with quick swap vat/bed or something along those lines. Really want Ultimaker to move away from the UM3 and S5 style nozzle and back to something more along the lines of the UM2+ olsson block(with some updates/improvements of course). I can dream i suppose.

+1.

[cloakfiend 996]

Ohh some exciting news lol!

I'm curious as to the developments as not even quite sure if beating the Um2+ for quality is even possible?

But continuous printing, a conveyor belt? and exit door at the back? hmmm not long to wait now....

 

[xile6 0]

Id like to know what it is.

Sla has become main stream so it seems like they may go that route.

To bad my um2 extended is custom build and runs great.

Then i got a elegoo mars sla a month ago.

 

They gotta bring something really great.

[gr5 2,271]

@orionz06 - keep in mind that when new products are announced they don't necessarily ship within a few months.  I think when the S5 came out it didn't ship until about a month later.  I think the *announcement* can be well before the *release*.  So I'm not sure you want to delay any purchases.  

 

Maybe call your reseller and ask them for advice.  They might know what's coming.  They won't tell you but they can tell you if you should wait or not.

 

 

[gr5 2,271]

resin printer!??? that would be cool.  But didn't all the images show bowden tubes?  Hmm.  Resin printer with bowden tubes???  Seems unlikely?