And about the printhead moving to the center of the bed before moving to the prime tower. did anyone find a solution for this? It's indeed annoying...
Hi to all !
Yes ! it's indeed very very annoying, it kills completely the prime tower interest.
I tried to apply the Mark2Tweaks.py pluging, it doesn't work for me, may be this could work for someone else ?
Dear Gudo,
i just tested S3D 4.0, and there, the head moves as it should. To the ooze shield, not the center of the printbed.
I also tested Cura (2.7.2 B), and even if i put the prime pillar in the center, and the print at the rear left position, it goes to the print BEFORE it goes to the prime pillar.
So i assume it is a Cura thing.
What software version, and what X and Y start positions do you use?
Recommended Posts
Top Posters In This Topic
90
81
72
66
Popular Days
May 5
30
Mar 24
25
May 4
23
May 6
22
Top Posters In This Topic
RudydG 90 posts
foehnsturm 81 posts
tinkergnome 72 posts
ultiarjan 66 posts
Popular Days
May 5 2017
30 posts
Mar 24 2020
25 posts
May 4 2017
23 posts
May 6 2017
22 posts
Popular Posts
rigs
@zerspaner_gerd & @MarcoUbtz Thank you gentlemen, everything is working perfectly now https://www.youmagine.com/designs/flexible-coupler-using-colorfabb-ngen-flex
zerspaner_gerd
Already found?? Here are my noted links: https://forum.simplify3d.com/viewtopic.php?f=8&t=1959
morfeushav
I am creating too a holder for mount the clamping dock on a ultimaker 2 aluminum clone. I haven´t have yet the final part., and I have to test it. This is how looks
Posted Images
Siebet 27
Why are the acceleration and Jerk settings so low on the standard Mark2 profile?
Link to post
Share on other sites
gudo 246
Hi to all !
Yes ! it's indeed very very annoying, it kills completely the prime tower interest.
I tried to apply the Mark2Tweaks.py pluging, it doesn't work for me, may be this could work for someone else ?
Link to post
Share on other sites